There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available. The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle. EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of stainless steel and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from bronze and has 254 mm diameter. The conical mould is made of brass has dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height. Both models are supplied complete with stainless steel flow mould and tamper. EN model also has a stainless steel hopper.
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0892.4 is HV400 which is recommended by the EN standard. All moulds surfaces are protected with anti-corrosion oil. The webs of UTCM- 0892.4 and UTCM-0899A are matchmarked. Minimum surface hardness of UTCM-0892.2 is HV200.
The apparatus is used for determining the stiffening time of repair products and systems comprising hydraulic based mortar and concrete (CC), including those modified by the addition of polymers (PCC) and workable life of fresh mortar after the mixing procedures. The Apparatus consist of a vertical loading pillar with a base. Supplied complete with a brass penetration rod with washer and a sample container (Ø80x80 mm aluminum). UTC-0705 Needle Set for concrete setting time test acc.to ASTM should be ordered separately UTW-0637 Digital Balance for the initial setting time, workable life and stıffening time should be ordered separately, as well. Also, for determining concrete final setting time, instead of UTW-0637, UTW-0654 should be ordered separately.
UTC-6727.FPR, UTC-6737.FPR UTC-6747.FPR and UTC-6757.FPR models Automatic Four Column Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control Load measurment with a pressure transducer U-Touch PRO Control Unit for Automatic Compression / Flexure Testing Machines U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value
The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of concentric centering line/s of lower bearing block the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). Pressing the START button on the control unit. The machine automatically starts the rapid approach, when the specimen touches the upper platen the rapid approach is ended and starts loading at the pace rate that selected by user and stops once the specimen fails. Automatically saves the test parameters and test results. The Machines consist of a welded steel frame ( see table), hydraulic power pack with U-Touch PRO Control Unit. Main Features Safety Features U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve.
Steel beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards.
The UTEST fixed amplitude vibrating tables are compact units providing controlled vibro-compaction forcube or cylinder moulds. Vibrating tables consist of vibrating motor, command unit and clamping assembly. For laboratory use the table is availablein two alternative model. The small table accepts 2, large table accepts 6 cube or cylinder moulds by using clamping assembly. UTC-0900 and UTC-0910 tables can also be used for beam moulds. For on site applications, portable UTC-0920 Vibrating Table is designed for preparing the cube or cylinder specimens by vibration. 1 or 2 pcs. cube or cylinder mould can be clamped on the table depending on outer size of the mould to be used. UTC-0920 Vibration Tables are supplied complete with a converter (DC 12 to 220V).
Cast iron and hard plastic moulds are manufactured in accordance with dimensions and tolerances stated in the relevant standard. Four part body and attached to the base with a robust clamp, the cast iron moulds are designed to be durable, corrosion resistant and easy to clean. UTC-0820 plastic moulds manufactured from robust plastic are one piece and easy for field use, the specimens are ejected from the moulds by compressed air.
Density (Unit Weight) Measures are used to determine the weight per cubic meter of bulk or compacted agregates. The Density Measures are manufactured from heavy duty steel complying with the related standard. Available in 1, 3, 5, 7, 10, 15, 20 and 30 lt capacity models to comply with the relevant standards. The measures are coated against corrosion.
UTEST UTD Series Laboratory Ovens have been designed for drying asphalt, soil, rock, concrete, aggregate or similar materials. 50, 120, 250, 500 and 750 liter capacity models are available. Temperature range is from ambient to 200°C. The interior is manufactured from stainless steel and the exterior is robustly constructed from sheet steel finished in powder coated paint. All models are fan circulated (forced convection), fitted with direct reading digital control unit and equipped with PID digital control system, isolated double wall construction, gasket single door and heating elements designed into air channels.
UTEST is collaborating with world leader British sieve manufacturers to provide its customers a wide range of high quality testing sieves. Imported sieves are manufactured according to national and international standarts and supplied with calibration guarantee from manufacturer company. All imported sieves supllied with a manufacturers certificate of conformity including: mesh size, two way standart deviation, standart information, product serial code and date for traceability, Each sieve is manufactured according to quality assurance system procedures with using high quality materials. During production stage wire mesh is controlled by optical projection method or advanced computer scanning methods. After precise measurements sieves with verified mesh openings and diameter sizes are certified by manufacturer. Woven Wire Mesh Sieves Wire mesh sieves are produced according to ASTM, ISO and BS standarts. Sieves are manufactured at 3”, 8”, 12”, 18” our 38 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 315 mm, 350 mm, 400 mm, 450 mm diameters depending on related standard and mesh opening between 38 μm and 125 mm. Perforated Plate Sieves Perforated plate sieves are widely used different parts of the industry. Perforated plate sives can be supplied with square holes between 4 mm and 125 mm mesh openings, round holes between 4 mm and 125 mm mesh openings, with braas or stainless steel frame and 200, 300, 450 mm diameters. Washing Sieves Washing sieves are used to extract the specimen with wet sieving method without any material loss. Washing sieves supplied with 8”, 200 mm, 18 inç or 450 mm diameters and 4”, 100 mm, 12 inch and 300 mm depths, with braas or stainless steel frames. Pan and Cover Pan and covers can be supplied with brass or stainless steel frames with 3”, 8”, 12”, 18”, 38 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 315 mm, 350 mm, 400mm, 450 mm diameters.
Hard plastic and steel cylinder moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Two part and clamp attached base plate cast iron, plastic and steel moulds are designed to be durable, corrosion resistant and easy to clean.
