Prefabricated cone in high-quality exposed concrete for closing tie holes with an inner diameter of 22 to 26 mm in combination with cones with a fitting length of 10 mm as well as OKTAGON-PLUS 22 or 26. The Sichtbetonkegel Universal is only used to visually close the tie hole and does not provide protection against water under pressure.
Spacer with 4-point support made of cast concrete. With eyelet wire for attachment to the reinforcement. Due to the low contact points with the formwork, very suitable for exposed concrete.
Extra strong, linear fibre-reinforced concrete spacer for lower reinforcement. Only limited suitable for fair-faced concrete.
Large-area and extra strong spacer, mainly for lower reinforcement. Extra good concrete flow because of large side and top cut-outs. The wave support at the top prevents the reinforcement from slipping. Only possible with Drupak "1". Only limited suitable for fair-faced concrete and prefabricated slabs. Due to the better tilting stability, we recommend Drupak "2" from a concrete cover of 40 mm. Can be extended as required with plug-in coupling, production length 1 m.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation. With holes on the sides for better concrete flow without affecting stability.
Spacers specially developed for the use of pile cages. Also suitable for diaphragm walls.
Large-area and extra strong spacer, mainly for lower reinforcement. Extra good concrete flow because of large side and top cut-outs. Only limited suitable for fair-faced concrete and prefabricated slabs. Due to the better tilting stability, we recommend Drupak "2" from a concrete cover of 40 mm. Can be extended as required with plug-in coupling, production length 1 m.
Linear, labour-saving plastic spacers for lower reinforcement with grid notches. The grid notches prevent the first reinforcement layer from slipping. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
Linear, labour-saving plastic spacers for lower reinforcement. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
