Large-area spacer for light reinforcement with very good concrete flow. Pointed feet for minimal contact with the steel formwork - optimal for exposed concrete. Upward facing spikes prevent the reinforcement from slipping.
Spacer for light reinforcement with very good concrete flow. Low contact with the formwork due to special feet. Without upward facing spikes. Can be extended as required by plug-in connection.
Sortable spacer for semi- or fully-automatic assembly on rebars in the precast factory. Unoclip with an inner core for two different steel diameters (6-8 mm or 8-10 mm) can also be applied manually to the rebars. The small contact area of the Unoclip on the formwork bases or forms ensures the best possible concrete surface without visible spacers.
Spacer for light reinforcement with very good concrete flow. Very stable due to lateral support at the feet. Low contact with the formwork due to special feet.
Plastic plugs with vent holes for closing tie rod sleeves after demoulding and removal of cones.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation. With holes on the sides for better concrete flow without affecting stability.
Spacers specially developed for the use of pile cages. Also suitable for diaphragm walls.
Strong plastic spacer with elastic clamping unit.
Spacer for the production of prefabricated hollow walls. Efficient attachment by inserting the shoe under the reinforcement. Immediate secure standing of the spacer.
Strong plastic spacer with large clamping range for medium and heavy reinforcement. Used in all areas of application in the precast industry and on the construction site. With pointed foot especially suitable for steel formwork for best exposed concrete quality. With flat foot for wooden formwork.
Spacer for the production of prefabricated hollow walls. Efficient attachment by inserting the shoe under the reinforcement. Immediate secure standing of the spacer. Small foot for close-meshed reinforcement.
OKTAGON®-PLUS 22 plastic cone for the self-production of watertight formwork spacers. By cutting a 22/26 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON®-PLUS 22 can be produced.
