Ready-to-use formwork unit for rectangular and square columns.
Hohlwanddübel for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! A wood screw DIN 571, Ø 12 x 70 mm is used for attachment of the prop to the Hohlwanddübel. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw and washer.
A real all-rounder in our range.
The universal solution for all side protection tasks. A multitude of possible combinations save time and money.
For better logistics on site, in storage and transport.
Concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm hexagon head with pressed-on washer and cone, SW-24, galvanised blue, A2K for use with Hohlwanddübel-Plus (Art. No. HWDP16 and HWDPM16) and 16 x 90 mm for use with Hohlwanddübel-Plus Massivwand (Art. No. HWDPMW16 and HWDPMMW16).
Hohlwanddübel-Plus for temporary fastening of props on solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. Only the approved MULTI-MONTI®-plus SSK 16 x 90 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. Supplied without magnet, screw and washer.
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. The anchor block enables the connection of the system screws and with this the connection to the screw guide during the assembly of the wall elements.
Wood screw according to DIN 571, Ø 12 x 70 mm for use with Hohlwanddübel "K" (Item No. HWD12) and Ø 12 x 80 mm for use with Hohlwanddübel "M" (Item No. HWDM12).
Hohlwanddübel for temporary fastening of props and corner brackets to double and solid walls in the assembly state. The Hohlwanddübel is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. A wood screw DIN 571, Ø 12 x 80 mm is used for attachment of the prop to the Hohlwanddübel. Supplied without magnet, screw and washer.
Test sleeve (No. 47794) for the concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm and 16 x 90 mm.
All fall protections in one system. Many advantages - a multi-talent.
