Hohlwanddübel for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! A wood screw DIN 571, Ø 12 x 70 mm is used for attachment of the prop to the Hohlwanddübel. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw and washer.
A massive bracket platform for use as working-, safety- and climbing scaffold.
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. The screw guide enables the placement of the system screws and the connection to the anchor block during the assembly of the wall elements.
Magnet for mounting the Hohlwanddübel-PLUS "M" (Item No. HWDPM16) or Hohlwanddübels-PLUS Massivwand "M" (Item No. HWDPMMW16) on steel formwork.
Mounting wedge made of plastic with non-slip, ribbed contact surface.
Mounting set with accessories for on-site assembly of solid and double walls. Standard mounting set consisting of: - 30 MULTI-MONTI®-plus SSK 16 x 130 mm screws - 60 each of UP02, UP03, UP05, UP10, UP20 leveling shims Customised mounting sets on request.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. Only the approved MULTI-MONTI®-plus SSK 16 x 130 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. Supplied without magnet, screw and washer.
The ribbed expanded metal made of galvanised sheet steel is used as permanent formwork. Due to the rib height of approx. 21 mm and the special profiling, it is extremely strong and ensures a perfect bond of the construction joints.
Mounting wedge made from hardwood.
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. System screw for connecting wall elements.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets to solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! Only the approved MULTI-MONTI®-plus SSK 16 x 90 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets on double walls in the assembly state. The Hohlwanddübel-Plus is positioned on the formwork at the factory using hot-melt adhesive. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot-melt adhesive. Alternatively, the Hohlwanddübel-Plus can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot-melt adhesive runs into the screw guide! Only the approved MULTI-MONTI®-plus SSK 16 x 130 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw.
