Plastic wheel spacers for vertical reinforcement.
OKTAGON®-PLUS 26 plastic cone for the self-production of watertight formwork spacers. By cutting a 26/30 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON®-PLUS 26 can be produced.
Large-area and extra strong spacer, mainly for lower reinforcement. For all applications where the reinforcement has to be spaced against soft surfaces, e.g. insulation boards. For this purpose, the Drupak is placed with the flat side on the insulation. Extra good concrete flow because of large side and top cut-outs. Can be extended as required with plug-in coupling, production length 1 m.
Plastic cone for large-area transmission of the clamping forces and for protection of the formwork. Fitting length 10 mm.
Large-area spacer with high step stability for the lower reinforcement. Because of its zigzag shape and the staggered feet, a good concrete flow is guaranteed. By simply turning it over, the DRUWA can also be used on soft surfaces. Due to its special shape, the DRUWA is easily stackable. This results in optimal freight cost savings and storage space utilisation!
Linear, labour-saving plastic spacers for lower reinforcement with grid notches. The grid notches prevent the first reinforcement layer from slipping. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
Large-area spacer for light reinforcement with very good concrete flow. Pointed feet for minimal contact with the steel formwork - optimal for exposed concrete. Upward facing spikes prevent the reinforcement from slipping.
Extruded plastic profiles with nail flag for breaking concrete edges. Including nail holes for easy attachment to the formwork.
Extruded plastic profiles for breaking concrete edges. Solid profile without nail holes.
Cone 22 mm for exposed concrete requirements with glued-on sealing washer.
Extruded plastic profiles for breaking concrete edges. Including nail holes for easy attachment to the formwork.
Large-area spacer for vertical reinforcement with hooks.
